Migration From Exchange 2010 to Exchange 2016 (& 2013) Part 3

fonte: https://www.petenetlive.com/KB/Article/0000816

Part 3

Migrating Certificates and Decommissioning Exchange 2010

KB ID 0000816 Dtd 04/11/13


Continued from Migration From Exchange 2010 to Exchange 2016 Part 2


Exchange 2013/2016 Migration Step 8 Migrating Certificates from 2010 to 2016

Only consider doing this if you have a purchased (i.e. NOT using a self signed) certificate on your Exchange 2010 server. Bear in mind if you have the internal FQDN of your Exchange 2010 server as a SAN (Subject Alternative Name), then you cannot renew the certificate if it lasts longer than November 2013, so you might want to purchase a new one anyway.

Also make sure the public name of the server resolves to the public IP of the new server (or you change the port forwarding for HTTPS traffic to point to the new server).

1. On the Exchange 2010 Server > Launch the Exchange Management Console > Server Configuration > Select the certificate > Export Exchange Certificate.

Exchange 2010 Export Certificate

2. Select a location to save the exported cert > supply a password > Next.

2010 Export to pfx

3. Finish.

Migrate Exchange 2010 Certificate

4. On the Exchange 2013/2016 Server > Launch the Exchange Admin Center > Servers > Certificates > Select the ‘more options’ icon > Import Exchange Certificate.

Exchange 2013 Import Certificate

5. Put in the path to where you saved the exported cert, and the password you used > Next.

2013 Import pfx

6. Add in the Exchange 2016 Server > Finish.

Assign Certificate to Exchange 2013

7. Select the new certificate > Edit > Services > Select the service for which you want to use the certificate. Note: I don’t have Unified Messaging so I’m selecting all the other options > Save.

2013 Assign Services to Certificate

8. Answer ‘Yes’ to replace the self signed certificate that Exchange 2016 installs by default.

Exchange 2013 Certficate Overwrite

9. You can then open Outlook Web Access and give it a test (Remember to change the DNS records so that the Common Name on the certificate points to the new Exchange 2016 server).

Exchange 2013 Test OWA Certificate

Exchange 2013/2016 Migration Step 9 Decommissioning Exchange 2010

Before doing this: Have a quick common sense check!

  • Do you need to migrate any Transport rules? (For Exchange Disclaimers etc).
  • Do you need to change any Journaling settings for your third party Email Archive solutions etc.
  • Do you need to replicate ant receive connectors from the old email server to  the new one? (For Scanners, Photocopiers, SharePoint, SQL Mail, SAP, etc).

1. Before we can retire the old server we need to remove its databases, even though we have moved all the user mailboxes, If you try and delete the database it will complain that’s its not empty. This is because it will have either Archive or Arbitration mailboxes in it. To see, execute the following commands;

Get-Mailbox -Archive Get-Mailbox -Arbitration

OR, If you have multiple source databases use the following syntax,

Get-Mailbox -Archive  | fl name,database Get-Mailbox -Arbitration  | fl name,database

As you can see (in the diagram below) I have Arbitration mailboxes left in the old Exchange 2010 database, to move them use the following command, Note: Execute this command from the Exchange 2013 Server!Get-Mailbox -Database “Mailbox-Database” -Arbitration | New-MoveRequest -TargetDatabase “Mailbox-Database-2016

Obviously if you have archive mailboxes use the same command, but substitute archive for arbitration.

Show Arbitration Mailbox

Note: Update 04/11/13 (Credit to Jeroen Bonenberg)

You may also have a Discovery Search Mailbox that will need migrating. To do so, use the following syntax.New-MoveRequest DiscoverySearchMailbox* -TargetDatabase “Mailbox-Database-2013

2. Wait a while and then check that they have moved. Note: You can check status with ‘Get-MoveRequest’.

Move Arbitration Mailbox

3. In the Exchange Management Console > Organization Configuration > Mailbox > Database Management > Select the mailbox database > right click > Dismount Database.

Exchange 2010 Dismount Mail Store

4. Now Remove the database > Yes.

Exchange Remove Database

5. OK.

Confirm delete database

6. Offline Address Book Tab > Default Offline Address Book > Remove > Yes.

Note: If this OAB is still in use you will NOT be able to remove it, Go to the Address Book Policies tab > Change the default OAB from the 2010 one to the 2013 one.

Remove Outlook Address Book

7. If you try and remove the public folder database it will complain that it contains replicas, which you cant remove. The easiest way I’ve found to remove it is as follows. Dismount the public folder database.

Cannot Delete Public Folder Database

8. Then delete (or move if you are paranoid) the database file (.edb file) and the logs for this database.

Delete edb files

9. Then mount the database > Yes to all > It will mount a blank empty database.

Mount empty database

10. You can now delete the database without error.

Delete Public Folder Database

11. OK.

Confirm database delete

12. Close Exchange System Manager > Start > In the search/run box >appwiz.cpl {Enter} > Locate Microsoft Exchange Server 2010 > Uninstall.

Remove Exchange 2010

13. Next.

Exchange 2010 Maintenance Mode

14. Untick all the installed roles > Untick Management tools > Next.

Exchange 2010 Remove Roles

15. Uninstall.

Uninstall Exchange 2010

16. Finish.

Remove Exchange 2010

Exchange 2013/2016 Migration Step 9 ‘Finish Up’

Remember if you are keeping this server, you might want to delete all the database files which get left behind. You will also want to change your backup software so that it is pointing to the new mailboxes/databases.

Related Articles, References, Credits, or External Links

Thanks to Shawn Welker for the Arbitration/Archive feedback
Thanks to leandro.chiesa for the OAB feedback

Lascia un commento

Il tuo indirizzo email non sarà pubblicato. I campi obbligatori sono contrassegnati *

Questo sito usa Akismet per ridurre lo spam. Scopri come i tuoi dati vengono elaborati.